by Chantale | Apr 22, 2025 | Learning Center, Roofs
Video: https://youtu.be/14QprBDcIUk Transcript: Editing the shape of an existing roof in Envisioneer can be used to attach a porch roof. In our example, we will edit the roof edge by adding breakpoints to move an edge out to create a gable porch roof. Let’s create... by Chantale | Apr 2, 2025 | Learning Center, Roofs
Video: https://youtu.be/GOCCXGo8oKI Transcript: To create a flat roof in Envisioneer, design a low-slope surface or multiple surfaces that direct water drainage to a designated area. You can also add walls to incorporate a parapet into your roof design. Parapets... by Chantale | Feb 24, 2025 | Learning Center, Roofs
Video: https://youtu.be/BknUcGJHJjU Transcript: A cricket must be created in a roof design that needs adjusting to help facilitate the shedding of water and/or snow. In Envisioneer, we will create the cricket using surfaces and add it to a parallel gable roof design.... by Chantale | Feb 24, 2025 | Learning Center, Roofs
Video: https://youtu.be/tuj-KKg3wUY Transcript: The Roof by Perimeter tool follows rules to eliminate the need for crickets and saddles. Some roof designs need those items, so we must use the Roof by Picking Points tool. In a design that calls for parallel gable... by Chantale | Jan 9, 2025 | Learning Center, Roofs
Video: https://youtu.be/XRqDtZ6xmjk Steps: To create a Barrel Roof in Envisioneer, use the Arched Roof option after generating a gable roof. In this example, an 18’ x 36’ structure has been prepared with a 6/12 shingle roof already applied. The front and back of the... by Chantale | Aug 20, 2021 | Learning Center, Roofs, Working Drawings |
Video: https://youtu.be/ThVkvSroehs Transcript: Once framing is inserted into an Envisioneer model it can be labeled to correspond with a schedule to be included with framing plans in a set of working drawings. For this video, we will create a roof rafter plan with a...