MDD

Return to Community Posts

Forum Replies Created

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Replies
  • in reply to: Best computer for Envisioneer? #14263
    MDDMDD
    Participant

    Will Envisioneer work on multiple screens? I have a separate monitor and would like to place the 3D model on the other screen so I don’t have to keep flipping back and forth on my single screen.

    in reply to: 2 questions – Dormers and Valleys #14233
    MDDMDD
    Participant

    Thanks for the info Conrad.

    This project has been interesting.  I have been constrained by this project parameters.  The customer had a house that burned down.  They saved the foundation and floor.  It was a house built in the 70’s.  very “Brady Bunch” style.  They want a new “Victorian” style home within the existing foundation limitations.

     

    Thanks again.

    in reply to: Best computer for Envisioneer? #14221
    MDDMDD
    Participant

    Do I need to get a Desktop with a massive RAM and fastest graphics available and fastest processor or do I just need RAM – OR – a faster graphics card – OR – processor?

    When I forget to switch off the “Show View Contents” box in the print command it takes FOREVER for the preview to finishing “Drawing” and let me finish plotting.  Been a few times the program just quit working in the middle of plotting waiting for the ‘Contents’ to finish drawing.

    Not to mention that when I want to view in 3D and ‘Orbit or Fly Around” the exterior of the house, I have to make sure the render option is off and placed on ‘Hidden view’ or ‘Patterned” because its just too slow and jumpy when in  ‘Rendered’ or ‘Rendered Outline’.

     

    • This reply was modified 1 month ago by MDDMDD.
    in reply to: Best computer for Envisioneer? #14220
    MDDMDD
    Participant

    I do 2D and 3D.  Use the 3D to help customers understand what they are looking at and asking for.

    in reply to: Gable Issues #13544
    MDDMDD
    Participant

    Thank you SDS.  I placed a wall above an existing wall on the attached pic.  The area where it was showing half a gable.  I put a wall above it and it keeps disappearing.  Either the gale disappears or the existing wall itself disappears.  Hair pulling !!!!

    in reply to: Inserting Smartviews #12751
    MDDMDD
    Participant

    Figured it out.

    in reply to: Custom Dim Style/Text #12726
    MDDMDD
    Participant

    Figured it out.  Thanks for the tutoring.

     

    in reply to: Viewing different locations at the same time #12666
    MDDMDD
    Participant

    Thank you very much.

    in reply to: Inserting SametViews – visibility issues #11785
    MDDMDD
    Participant

    Thank you very much.

    in reply to: Inserting SametViews – visibility issues #11782
    MDDMDD
    Participant

    3 levels.  Foundation- Floor Plan – knee wall.  Looks good in 3D.  The knee walls are placed on top of 8ft walls to create the 10ft ceiling height.  From there the knee walls on the gables are skewed up to create the gables.  The windows are a good 3ft above the doors.  Does this issue have anything to do with the small dialogue box on the right side of the layers section. It’s got the levels listed in it.  Don’t know what it’s for.  It’s got a check box that is checked.  It’s in the layer box when defining a smartview.

    in reply to: Inserting SametViews – visibility issues #11781
    MDDMDD
    Participant

    3 levels.  Foundation- Floor Plan – knee wall.  Looks good in 3D.  The knee walls are placed on top of 8ft walls to create the 10ft ceiling height.  From there the knee walls on the gables are skewed up to create the gables.  The windows are a good 3ft above the doors.  Does this issue have anything to do with the small dialogue box on the right side of the layers section. It’s got the levels listed in it.  Don’t know what it’s for.  It’s got a check box that is checked.

    in reply to: Inserting A Structural Floor #11777
    MDDMDD
    Participant

    Thanks for the info.  I looked on my program and those options are not available.  I guess I will need to upgrade from Pro Architect.

Viewing 12 posts - 1 through 12 (of 12 total)
Return to Community Posts