Inserting SametViews – visibility issues
- AuthorPosts
- August 11, 2019 at 5:44 pm #11779
MDDParticipantMy house has a raised center (10’ walls) with a vaulted ceiling. I have windows above doors in the raised area. When I insert a new smartview it keeps overlapping the windows with doors below. It’s a big jumbled mess. For some reason it keeps showing the doors and windows as if they are on the same level. The windows are in a set of skewed knee walls that create the end gable. They are on a different level from the first floor. Frustrated.
August 11, 2019 at 11:45 pm #11780
FynrDzynrParticipantHow many locations are you using?
could be incorrect floor levels in Locations?
Are some windows at a different head height to others? If so you’ll need to elevate some . . . . rt-click on the window(s), elevate, enter the distance above floor level to window head
TIP!
Check that everything appears correct in 3D before you start generating SmartViews
hth
Merv
August 12, 2019 at 12:19 am #11781MDDParticipant3 levels. Foundation- Floor Plan – knee wall. Looks good in 3D. The knee walls are placed on top of 8ft walls to create the 10ft ceiling height. From there the knee walls on the gables are skewed up to create the gables. The windows are a good 3ft above the doors. Does this issue have anything to do with the small dialogue box on the right side of the layers section. It’s got the levels listed in it. Don’t know what it’s for. It’s got a check box that is checked.
August 12, 2019 at 12:22 am #11782MDDParticipant3 levels. Foundation- Floor Plan – knee wall. Looks good in 3D. The knee walls are placed on top of 8ft walls to create the 10ft ceiling height. From there the knee walls on the gables are skewed up to create the gables. The windows are a good 3ft above the doors. Does this issue have anything to do with the small dialogue box on the right side of the layers section. It’s got the levels listed in it. Don’t know what it’s for. It’s got a check box that is checked. It’s in the layer box when defining a smartview.
August 12, 2019 at 12:46 am #11783FynrDzynrParticipantaha! Now I think I understand. You’re inserting a 2D plan SmartView, but elements on other Locations are displayed.
hth
Merv
August 12, 2019 at 4:07 am #11785MDDParticipantThank you very much.
- AuthorPosts