Pages: [1]   Go Down
« previous next »
Print
Author Topic: Load Catalog  (Read 538 times)
Jack Zimmer
Forum Mentor
*
Posts: 1174


WWW
« on: May 26, 2012, 03:51:31 PM »
I am getting an error when I try to insert a Plant.

How do I reinstall the Encylopedia ?

Jack
Logged
Jack Zimmer
Your custom 3D Model - starting at $350

jkzimm at charter.net
http://www.zimmerdesign.com/

Roof Training Videos
http://3dhousedesigns.com/index.php?option=com_content&view=article&id=31&Itemid=25
FynrDzynr
Global Moderator
Forum Mentor
*****
Posts: 3911


Age=overthehill but I'm not saying which one!


WWW
« Reply #1 on: May 26, 2012, 11:31:48 PM »
Sorry Jack, I've never seen that one before.
Merv
Logged
Envisioneer CS 8.2
Designer-artist-story teller - translating someone's dream (mine or my client's) into words & pictures of what could be
Member, Building Designers Assoc Qld
Member, Australian Architecture Assoc
Allan Chesney
Forum Friend
*
Posts: 682


WWW
« Reply #2 on: May 27, 2012, 03:10:52 AM »
Hi Jack,

I have not see exactly this message but have seen about Garden.db not being accessible (which is the same thing I suspect). I have had this personally (with TFP) but it turned out to be Windows Vista that had tied itself into a knot and had to be replaced by Windows 7. There have also been others reported the same thing with TurboFloorPlan. Search the TFP forum for Garden.db and you will find the references/solutions, which hopefully will fix yours.

Allan
Logged
Allan Chesney,
Kalamunda, Perth, Western Australia

Envisioneer CS 8 (0.C1.1068)
TurboFloorPlan V16
TurboCAD V17 Professional
Jack Zimmer
Forum Mentor
*
Posts: 1174


WWW
« Reply #3 on: May 27, 2012, 06:19:12 AM »
Thanks,

I will check things out on TFPlan Allan.
I had a power outage during thunderstorm which may have caused the problem. Some 'images' from the Catalog are blank. May be causing a rendering problem at times but I'm not sure on that.

Jack
Logged
Jack Zimmer
Your custom 3D Model - starting at $350

jkzimm at charter.net
http://www.zimmerdesign.com/

Roof Training Videos
http://3dhousedesigns.com/index.php?option=com_content&view=article&id=31&Itemid=25
Jack Zimmer
Forum Mentor
*
Posts: 1174


WWW
« Reply #4 on: May 27, 2012, 06:50:20 AM »
Hi Allan, Merv

Looks like the TFPlan problems with Catalog were related to C and D drive issues. I have all on C Drive.

I do see that v6 and v7 have identical Plant Encylopedia sizes listed under Program Data. My guess is I could copy v6 data to v7 replacing the corrupted v7 file.... but I think I'll wait until Cadsoft has finished their move to a new office and can properly guide me.

You can see two cases where the image shows a maple and I can insert it but under materials there is nothing assigned.

The orchid is missing everthing.

Some items I can insert and they work, some are missing, that is what the error notice is all about.

I'll post the fix when Cadsoft tells me what to do . 

thanks,

Jack
Logged
Jack Zimmer
Your custom 3D Model - starting at $350

jkzimm at charter.net
http://www.zimmerdesign.com/

Roof Training Videos
http://3dhousedesigns.com/index.php?option=com_content&view=article&id=31&Itemid=25
Allan Chesney
Forum Friend
*
Posts: 682


WWW
« Reply #5 on: May 27, 2012, 08:13:49 AM »
Hi Jack,

Hopefully this would fix the problem, assuming the Garden.db is actually corrupted. In my case I did this and it made no difference. As I mentioned before though, it turned out to be a corruption in Vista that was the issue in my case. Interestingly - we had also had a power failure just before - I wonder if that was what upset Vista?.

I know some other TFP users solved the problem by replacing the file or relocating it.

Allan
Logged
Allan Chesney,
Kalamunda, Perth, Western Australia

Envisioneer CS 8 (0.C1.1068)
TurboFloorPlan V16
TurboCAD V17 Professional
Pages: [1]   Go Up
Print
« previous next »
Jump to: