Pages: [1] 2 3 4   Go Down
Print
Author Topic: Version 6 Launch  (Read 11890 times)
Chantale
Administrator
Forum Mentor
*****
Posts: 727



« on: December 14, 2009, 08:38:01 AM »

Hi

We had sent out an email regarding the launch of version 6. If you did not receive that email, you can find full details here:

http://www.cadsoft.com/v6.php

We would love to see you in Las Vegas for the launch party or in the virtual launch that we will do live from the party.

We are doing training that entire day and the classes (both introduction and advanced) will be using the new version 6. If you want further instruction on Envisioneer these are both excellent classes to attend and meet the staff of Cadsoft. Many of us will be on hand during the classes and during the launch party.
Logged

~Chantale
chrisjcohen
Forum Friend
*
Posts: 472


« Reply #1 on: December 15, 2009, 08:18:52 PM »

Hi all at cadsoft
Any idea of cost to us users at this point of time
The Australia dollar might hit a new high soon.( could save us down under some dollars )
I have 5.2 working on Laptop but still not on main PC as that little bug just wont let it update. Hope that is all fixed now
Thanks Chris
Logged
CB
Forum Mentor
*
Posts: 982



« Reply #2 on: December 16, 2009, 01:22:34 AM »

Does anybody know the licensing for using Envisioneer on 2 computers? Is it like Sketchup where you can use only one at a time?
Logged

Chris
Brownie
Forum Friend
*
Posts: 254


WWW
« Reply #3 on: December 16, 2009, 01:27:51 AM »

Good question.

Though, I am under the impression it is a licence per machine.
Logged

Brownie
chrisjcohen
Forum Friend
*
Posts: 472


Lic
« Reply #4 on: December 16, 2009, 02:34:24 AM »

Hi Boys
I have been able to use laptop and main Pc under one lic:
I only use my laptop to take to Clients homes and show them their plans
and make some change to the plans  so they can see it.
I am the ONLY ONE that uses this laptop. and also my main Pc
We all have our own Pc/ laptops at home and that is were I work from not an out side office.
I find it is better to go to my clients homes as it can suit them better
Also I can leave quicker and not have them spending hours at my home when dinner is ready or when I have had enought.
Chris
Logged
FynrDzynr
Global Moderator
Forum Master
*****
Posts: 5338


Age=overthehill but I'm not saying which one!


WWW
« Reply #5 on: December 16, 2009, 03:00:48 AM »

Quote from: "chrisjcohen"
I find it is better to go to my clients homes as it can suit them better
Also I can leave quicker and not have them spending hours at my home when dinner is ready or when I have had enough.
Chris
+1  Cheesy & I don't have to keep the office tidy - actually found a file yesterday that I'd not seen since the beginning of the year. Still can't find a folder for a job from May/June . . . . all the paperwork for the first half was clipped together but all the EO stuff? . . . ?
Yes, PC & lappy here too - for the same reasons.
Merv
Logged

Envisioneer CS 10
Designer-artist-story teller - translating someone's dream (mine or my client's) into words & pictures of what could be
Member, Building Designers Assoc Qld
Member, Australian Architecture Assoc
Chantale
Administrator
Forum Mentor
*****
Posts: 727



« Reply #6 on: December 16, 2009, 09:03:34 AM »

Our license agreement allows for the install on 2 machines that will be used by 1 user. "1 to show and 1 to work" rule so you can go onsite with a laptop and work on a desktop at the office.

You will need to speak with your local dealers for pricing in local currencies.
Logged

~Chantale
jm
Forum Friend
*
Posts: 338


« Reply #7 on: January 04, 2010, 12:09:02 AM »

WOW a new release has it been that long already! :shock:

Any news on if the new version will be backwards compitable or not?
Logged

Jeremy Murphy
CAVALIER HOMES AUSTRALIA PTY LTD
Email: jmurphy@cavalierhomes.com.au
Brownie
Forum Friend
*
Posts: 254


WWW
« Reply #8 on: January 10, 2010, 06:08:37 PM »

I don't think we will know anything till the showing in Vegas.

Might get a leaked pdf if we are lucky?
Logged

Brownie
FynrDzynr
Global Moderator
Forum Master
*****
Posts: 5338


Age=overthehill but I'm not saying which one!


WWW
« Reply #9 on: January 10, 2010, 07:26:33 PM »

Here's hoping!
Ppl going to Vegas think they're lucky, going the other way they usually know better.
Bit like dealing with the Qld government, you just can't win
Merv
Logged

Envisioneer CS 10
Designer-artist-story teller - translating someone's dream (mine or my client's) into words & pictures of what could be
Member, Building Designers Assoc Qld
Member, Australian Architecture Assoc
bundulla
Forum Friend
*
Posts: 202


V6
« Reply #10 on: January 12, 2010, 07:43:21 AM »

Not sure if it is old info, but I stumbled on this, which could be interesting   http://www.novedge.com/brands/46

Maurie
Logged

Maurie

Elanora, Australia
FynrDzynr
Global Moderator
Forum Master
*****
Posts: 5338


Age=overthehill but I'm not saying which one!


WWW
« Reply #11 on: January 12, 2010, 04:13:06 PM »

G'day Maurie!
Well spotted. Did you try to download the "trail" version? or is that just for cowboys? on another page it was a "trali" download . . .
Quote from: "bundulla"
Not sure if it is old info, but I stumbled on this, which could be interesting   http://www.novedge.com/brands/46
Logged

Envisioneer CS 10
Designer-artist-story teller - translating someone's dream (mine or my client's) into words & pictures of what could be
Member, Building Designers Assoc Qld
Member, Australian Architecture Assoc
bundulla
Forum Friend
*
Posts: 202


« Reply #12 on: January 12, 2010, 05:16:58 PM »

G'day Merv

The "trail" version is V5.

The info may also relate to V5, but I'm hoping "CAD drafting tools" & "Advanced CAD editing tools" means we will be a lot closer to AutoCad LT 95's 2D drafting & editing tools than we are now, and "Multi-view drawing layouts" is marketing speak for live views

Maurie
Logged

Maurie

Elanora, Australia
Chantale
Administrator
Forum Mentor
*****
Posts: 727



« Reply #13 on: January 13, 2010, 11:32:51 AM »

All the information on our dealers site is related to 5.0. There hasn't been a leak yet...
Logged

~Chantale
bundulla
Forum Friend
*
Posts: 202


« Reply #14 on: January 13, 2010, 03:32:14 PM »

That's a bit scary Chantale. Did anyone at Cadsoft really believe that the worksheets in V5, which lacks a method for calculating areas, multiple copies, champher, fillet with radius,  curves in polylines, splines, repeating the last command & explodes imported circles into arcs, had "CAD drafting tools" & "Advanced CAD editing tools". I suppose we will know next week.

Maurie
Logged

Maurie

Elanora, Australia
Pages: [1] 2 3 4   Go Up
Print
Jump to: